Kiteboarding Control Bar Parts

Kiteboarding Control Bar Parts – Replacement Lines, Loops, Safety Systems & Hardware

Your control bar is the heart of your kiteboarding setup — and keeping it functioning at peak performance requires the right replacement parts. Welcome to the Elite Water Sports Kiteboarding Control Bar Parts Collection, where you’ll find precision-engineered components for tuning, repairing, and upgrading your existing bar system. Whether you ride Core, North, Naish, or other leading brands, this collection offers the essential parts needed to keep your control system safe, smooth, and session-ready.

This collection includes brand-specific parts compatible with Core, and North, and other leading kiteboarding manufacturers — ensuring every replacement component matches your bar system perfectly.

All products are selected, tested, and trusted by our team at Elite Water Sports, 3101 22nd Ave S, St. Petersburg, FL 33712. Our instructors and technicians maintain these exact parts daily across Florida’s toughest riding environments — from heavy-wind winter fronts to long-lasting Gulf Coast sea-breeze sessions.

If you’re replacing worn components, upgrading performance, or tuning your bar for optimal safety, this is the collection you can trust.

Pig Tails (Kiteboarding Pig Tails)

These short, color-coded connection loops are used to adjust line lengths, replace worn ends, or switch between different pigtail types. The Pig Tails set shown in your grid includes:

• Green and red identifiers

• Sturdy stitched loops

• Standard attachment knots

Perfect for ensuring your kite’s steering and power lines attach securely and evenly.

High V Split Kits (North High V Split Kit)

This kit contains two color-coded lines and a V-split connector, allowing riders to:

• Replace worn split point lines

• Adjust bar compatibility

• Restore steering precision

Essential for maintaining accurate geometry on North Navigator and other V-split bar systems.

Chicken Stick / Donkey Dick (Core Chicken Stick V1 for Sensor 2–2S)

Shown on Page 1, this part prevents accidental unhooking and ensures safe hook-in connection. Ideal for:

• Freestyle riders

• Beginners learning harness engagement

• Anyone replacing cracked or missing safety sticks

This Core version fits Sensor 2 and 2S bars precisely.

Loops for Navigator Pro (North Freestyle Loop, North Slide Surf Loop, North Freeride Loop)

Your screenshot shows multiple loop types for the North Navigator Pro system. These loops allow riders to customize their bar for riding discipline:

• Freestyle Loop → Larger loop for unhooking tricks

• Slide Surf Loop → Rope slider compatibility for wave riding

• Freeride Loop → All-around comfort and ease-of-use

Each loop connects to the Navigator quick-release system.

Adjuster Rope (Core SENSOR 3 Adjuster Rope)

This replacement depower/trim rope features durable sheathing and precise length tolerance. Riders replace this when:

• The rope becomes frayed

• Trim becomes uneven

• Bar loses smooth depower range

A must-have for Core Sensor 3 bar maintenance.

Depower Lines (Core Sensor 3S Bar Depowerline, Core Sensor 3 Depowerline)

These long, center-running lines handle the largest load in your bar system. They must be replaced when:

• Fraying appears

• The center rope becomes glossy or flattened

• You experience uneven depower behavior

Your screenshot includes both the Sensor 3S Depowerline and Sensor 3 Depowerline.

Line-Only Kits (Core Sensor 3 Bar Power Line Only)

Shown in your grid, the Sensor 3 Bar Power Line Only provides:

• A brand-specific center power line

• Exact length matching

• Correct attachment points

Vital for Core bar restoration.

Safety Rings & Hardware (Sensor 3–4 Bar Safety Combo Ring)

This stainless steel or alloy connector ring helps maintain correct safety routing on both Sensor 3 and Sensor 4 systems.

These rings must be replaced when:

• The ring becomes bent

• The coating wears

• Safety performance becomes inconsistent

Why Control Bar Parts Matter

A bar system is only as safe as the weakest component. Replacing worn parts increases:

✔ Safety

A fresh depower line or flag-out line ensures your system releases properly during emergencies.

✔ Performance

New loops, split lines, and pig tails restore precise steering and bar feel.

✔ Longevity

Replacing individual parts is far cheaper than buying a new bar.

✔ Compatibility

Brand-specific parts ensure perfect fit and reliable performance.

These parts are essential for kiteboarders who ride often or in strong wind conditions found throughout Tampa Bay and the Gulf.

Signs Your Bar Needs Replacement Parts

Your bar may require new parts if you notice:

• Fraying on center rope

• Difficulty sheeting or trimming

• Uneven line lengths

• Sticky or unreliable quick release

• Worn pig tails

• Line discoloration

• Reduced depower range

• Sloppy bar feel

Our shop team recommends replacing wear-prone components every 6–12 months for active riders.

Professionally Selected, Rider-Tested Components

The parts shown on Page 1 of your screenshot reflect real-world maintenance trends we see in Florida:

• Higher salt exposure

• Frequent riding on gusty days

• Constant relaunching and water immersion

We select replacement parts that withstand these conditions and provide long-lasting durability.

Why Buy Bar Parts from Elite Water Sports?

✔ Brand-Specific Components

We carry original parts from Core and North, as shown in the left-hand filter sidebar.

✔ Trusted by St. Petersburg Riders

Our repair shop manages hundreds of bar services every year.

✔ Expert Assistance

We help riders identify the exact part needed for their bar model.

✔ Guaranteed Compatibility Guidance

Avoid ordering the wrong size or version — we match parts to your bar system.

✔ Local Pickup + Nationwide Shipping

✔ Rider-Tuned Knowledge

Every item we stock has been tested by our instructors in local riding conditions.

Common Repairs These Parts Are Used For

Depower Line Replacement

Prevent bar sticking and reduce wear on your center insert.

Flag-Out Line Repair

Restore full emergency depower capability.

Pig Tail Replacement

Tune line lengths and fix worn pigtails on steering/power lines.

Loop Upgrades

Switch from freeride to surf or freestyle loops on North bars.

Adjuster Rope Replacement

Eliminate jerky trimming or seized cleats.

Split Line Repairs

Fix uneven steering or drifting kite behavior.

These parts keep your bar feeling fresh, crisp, and safe on every session.

Who This Collection Is Perfect For

✔ Riders who maintain their gear regularly

✔ Anyone noticing bar wear or frayed lines

✔ Core and North bar owners needing original parts

✔ Kiteboarders who ride multiple times a week

✔ DIY maintenance riders

✔ Schools, instructors, and repair shops

Your collection includes exactly the parts technicians need to keep bars safe and functional.

Keep Your Control Bar Safe, Smooth & Reliable

A kiteboarding bar is only safe when every component works as designed. The Kiteboarding Control Bar Parts Collection provides everything necessary to restore your bar to factory condition — from loops to lines to safety rings.

If you’re repairing your bar, upgrading parts, or ensuring your setup is safe for the season, start with the replacement components trusted by riders across Tampa Bay, St. Pete Beach, and the Gulf Coast.

Browse the collection, choose your brand, and keep your gear performing at its best.

Ride with confidence. Ride with safety. Ride with Elite Water Sports.