Levitaz Shaka L Wing Complete Foil

by Levitaz
Save 30%
SKU 210000012598

Demo Levitaz Shaka L Wing Complete Carbon Foil

This demo Levitaz foil is in really nice condition. We have used this foil for Surf Tow-Ins, Wind Winging, and Prone Surfing. It has a couple of surface scratches but is in immaculate condition (see photos).

ELITE WATERSPORTS NOTE: Our Staff and Team riders here in St Petersburg, Fl have been piloting the Levitaz foils for the past few months to venture into a newer performance foil. We have tested the Shaka's ability in Wind Winging, Prone Foiling, and Surf Tow-in. These foils are Surprisingly Predictable and Ultimately Stable.

ON A WAVE the Shaka L wing generates a lot of speed down the line with superior glide to lift ratio giving you balance and control. Pumping has never been so easy allowing you to rebound from outrunning a wave or breaching. 

WITH A WING (wind winger) The L and M Shaka wings will lift you in the lightest of winds. If you are advanced and using sinker boards, these foils provide you with the initial low end lift you need to surface and release the board off the water with less effort. At higher speeds, these foils are stable, yet maneuverable. Rather than being locked into a hike, the Shaka allows you to manageably wash off unwanted speed by changing your angle of attack. 

From Levitaz:


The Levitaz Shaka Hydrofoil series is the choice for all your hydro foiling styles. No matter what you plan to do, you will be right with your new Shaka. The L front wing and adjustable rear wing combined with our reliable hybrid masts, build a perfect combination for your foiling experience.

The Shaka Large wing has 2000 cm² wing area for smaller swell, pumping in calm water, wake foiling with low speed or learning in general. When it gets bigger and faster, swap to the smaller 1500 cm² sized Shaka M. (AVAILABLE @ ELITE).

Be ready for all conditions - get your SHAKA COMBO!

Call our shop to see if our Demo Shaka M wing is still available. 727-800-2202


  • Carbon/Aluminum
  • 70 cm lenght
  • Open fixing points for fast and easy assembly
  • Suitable for 4-screw plate mount (see FAQ "Mast Interface" for measurements)

The hybrid mast in 70 cm is perfect for first time flyers or extreme shallow water conditions.

The interfaces are made of strength anodized aluminum. The thin-wall design reduces weight and supports simultaneous maximum durability. The top plate has open fixing points which allow you to loosen the track nut bolts to slide the top plate out rather than completely remove them. This makes removing the mast for a fast and effortless transport easy.

The low drag carbon fiber section offers maximum stiffness in bending and torsion, to guarantee a stiff and direct-handling feeling.


Our unique connection system allows to change the front and rear wing in seconds. For every level and every condition we offer the perfectly matching carbon wing.

The SHAKA wings are manufactured with a full carbon plate contouring.

The lowest possible surface leads to minimal drag combined with maximum stiffness! We rely on our special high alloy steel comprising these advantages together. The assembly with steel is solid and very reliable.


You recently viewed

Clear recently viewed
Purchase Gift Cards